[Old News] Support moteur HPP-Germany Factory

Voir le sujet précédent Voir le sujet suivant Aller en bas

[Old News] Support moteur HPP-Germany Factory

Message par Nitrous le Dim 28 Juil 2013 - 16:11

Salut!

Voici une news qu'on avait pas vue avec le Staff: les supports moteur renforcés par HPP-Germany Factory.

voici le single:


HPP-Germany designed a motor mount manufactured from high-strength aluminum 7075-T6 exclusive for the E-MAXX 3905 from TRAXXAS. The motor mount enables mounting the electric motor type Titan 775 from TRAXXAS. This motor provides a huge torque with a moderate electric power consumption. The result is an excellent driving performance on stock level. Run time increases up to 20%.

Another benefit is the durability of the Titan 775 motors. Just in the cold and wet season, the Titan 775 motor is the perfect addition for sensitive brushless-systems. Impervious against splashing water, the Titan 775 motor with its stock electronic speed control EVX-2 will changed the snow track in to a race track. Even for damaged stock motors the Titan 775 motor is a very good replacement and convince with its durability and the broadband power delivery.


Recommendation
:


We are recommending to use pinions with 22 or 23 teeth and 5mm shaft diameter. The full power of the Titan 775 motors will be delivered only with


2 x 8,4 Volt NiMh Akkus



or



2 x 7,4 V LiPo-Akkus



Please note:


The stock gear cover cannot be used, please consider for off-road using.

Driving performance and run times are depending from battery type and quantity, gear ratio, tire diameter and additional factors. Information about driving performance and run times are experiences and could be deviate.


Delivery content:



  • 1x motor mount single Titan 775 manufactured from high-strenght aluminum 7075-T6, orange anodized.


  • 2x motor mounting screws M4x10 with washers.


Required accessories:
Pinion, electric motor TRAXXAS Titan 775 and electronic speed control TRAXXAS EXV-2 are not included and must be purchased separately.

et le Dual:



HPP-Germany designed a motor mount manufactured from high-strength aluminum 7075-T6 exclusive for the E-MAXX 3905 from TRAXXAS. The motor mount enables mounting two electric motors type Titan 775 from TRAXXAS. These motors providing a huge torque with a moderate electric power consumption. The result is an excellent driving performance above stock level.

Another benefit is the durability of the Titan 775 motors. Just in the cold and wet season, the Titan 775 motors are the perfect addition for sensitive brushless-systems. Impervious against splashing water, the Titan 775 motors with its stock electronic speed control EVX-2 will changed the snow track into a race track.


Even for damaged stock motors the Titan 775 motors are a very good replacement and convince with its durability and the broadband power delivery.



Recommendation:

We are recommending to use pinions with 22 or 23 teeth and 5mm shaft diameter. The full power of the Titan 775 motors will be delivered only with


2 x 8,4 Volt NiMh Akkus 



or



2 x 7,4 V LiPo-Akkus



Please note:

The stock gear cover cannot be used, please consider for off-road using.

Driving performance and run times are depending from battery type and quantity, gear ratio, tire diameter and additional factors. Information about driving performance and run times are experiences and could be deviate.


Delivery content:



  • 1x motor mount dual Titan 775 manufactured from high-strenght aluminum 7075-T6, orange anodized.


  • 4x motor mounting screws M4x10 with washers.

Required accessories:
pinion, electric motors TRAXXAS Titan 775 and electronic speed control TRAXXAS EXV-2 are not included and must be purchased separately. 

plus d'info ici: http://www.hpp-germany.com/factory-shop/index.php

_________________
Passion: Tendance dominante qui, contrôlée par la raison, sert de moteur à l'action, permet la réalisation de grandes entreprises... 

Pas d'aide par MP. Merci.

Nitrous
aDmIn PlIeUr De TiTaNe

Masculin
Nombre de messages : 4902
Age : 29
Localisation : Nantes
Emploi/loisirs : controleur technique PL / les caisses et le modélisme!
R.C. : Wild Willy 2 / Serpent S811e / W.U.N. FR-D / T.O.P Sabre FD2/ MAXX
Date d'inscription : 12/08/2007

Voir le profil de l'utilisateur http://arct-team.com/forum/index.php?sid=d8cca7f72799bc6ced8067f

Revenir en haut Aller en bas

Re: [Old News] Support moteur HPP-Germany Factory

Message par KiKiMaX le Dim 28 Juil 2013 - 18:29

Je l'avais vu quand je mettais pris mes hexas. Ils devraient sortir un support moteur juste un poil plus épais avec fixation d'origine. Ca se vendrait bien Wink

_________________
Retombe toujours sur ses roues

KiKiMaX
Administrateur

Masculin
Nombre de messages : 3827
Age : 102
Localisation : Cergy 95
R.C. : Beaucoup de Maxx
Date d'inscription : 12/08/2007

Voir le profil de l'utilisateur

Revenir en haut Aller en bas

Voir le sujet précédent Voir le sujet suivant Revenir en haut

- Sujets similaires

 
Permission de ce forum:
Vous ne pouvez pas répondre aux sujets dans ce forum