Centrale Maxx
Vous souhaitez réagir à ce message ? Créez un compte en quelques clics ou connectez-vous pour continuer.
Le Deal du moment : -40%
40% de remise sur les Nike Air Max 90 FlyEase
Voir le deal
83.97 €

Proline MAXX Performance CVD (par MIP)

Aller en bas

Proline MAXX Performance CVD (par MIP) Empty Proline MAXX Performance CVD (par MIP)

Message par Nitrous Mar 24 Aoû 2010 - 20:41

Proline MAXX Performance CVD (par MIP) CVD

Arrow Assembly
Please Follow Instructions Completely:
1. Spread a thin layer of MIP CVD's lube on couplings,
and insert into the axle.
2. Slide completed axles into the bone with the cross
holes aligned.
3. Insert the cross pin and make sure it is evenly
spaced on both sides of the bone.
4. Angle and turn CVD's so the set screw can be
installed with the supplied allen wrench. Always use
the included MIP Thread Lock on the set screws and
allow them to dry for 24 hours.

Arrow Installation
Front and rear CVD's:
1. Remove the stock plastic slider drive axles and yokes from your MAXX truck.
2. Install the MIP steel drive cups onto the transmission output shafts using M5 x 5 set screws and MIP Thread Lock. The drive cups and hubs are a precision fit so they may be snug on the output shafts. If needed you should carefully tap them on.
3. Slide completely assembled CVD's through the bearing hubs and inset axle cross pins, hubs, and wheels same as stock.
BE CAREFUL NOT TO OVER TIGHTEN THE WHEEL
NUTS AND BIND THE AXLES.

_________________
Passion: Tendance dominante qui, contrôlée par la raison, sert de moteur à l'action, permet la réalisation de grandes entreprises... 

Pas d'aide par MP. Merci.
Nitrous
Nitrous
Admin

Masculin
Nombre de messages : 4967
Age : 34
Localisation : Nantes
Emploi/loisirs : Tourneur de pouces professionnel
R.C. : Wild Willy 2 / T.O.P Sabre FD2 / Tekno RC MT410
Date d'inscription : 12/08/2007

http://arct-team.com/forum/index.php?sid=d8cca7f72799bc6ced8067f

Revenir en haut Aller en bas

Revenir en haut


 
Permission de ce forum:
Vous ne pouvez pas répondre aux sujets dans ce forum